Skip to content
RecordPure logo — studio microphone icon with the RecordPure wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Studio Microphones
  • Audio Interfaces
  • MIDI Controllers
  • Acoustic Treatment
  • Free Tools
RecordPure logo — studio microphone icon with the RecordPure wordmark
Free calculator

Recording Storage & Session Length Calculator

Estimate uncompressed recording size per hour and per session, and how many hours fit on a card, from sample rate, bit depth and track count.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Uncompressed PCM estimate; actual file sizes vary with headers, compression, sample-rate conversion and recorder format. This calculator gives planning estimates only. Actual recording capacity depends on your device and settings, so always do a test recording and keep backups of important sessions before relying on any estimate.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

An audio recorder storage calculator estimates how much card or drive space uncompressed recordings need: bytes per second = sample rate × bit depth ÷ 8 × tracks. Enter your settings and card size to see MB per hour, session size and how many hours fit. Built for podcasters, field recordists and multitrack mixer-recorder users.

How to use the recording storage calculator

  1. Choose the sample rate your recorder, mixer or interface uses (44.1 kHz to 192 kHz), or pick Custom and type any whole number from 8,000 to 384,000 Hz.
  2. Choose the bit depth: 16, 24 or 32 bits per sample. 32 covers both 32-bit float and 32-bit integer.
  3. Enter the number of tracks as mono channels. A stereo pair counts as 2; a four-person podcast with one mic each is 4.
  4. Enter a session length in minutes to see the size of one session and how many whole sessions fit. Leave it at 0 or blank if you only want hourly figures.
  5. Enter the card or drive size exactly as printed (MB, GB or TB) and, if you like, a reserve percentage you want to keep free.
  6. Pick the file layout your device writes: one file holding all channels, or a separate mono file per channel. This only affects the WAV file-size check, not the storage totals.

Results update as you type. Below the summary, a table shows MB per hour and hours on your card for 1, 2, 4, 8, 16 and 32 tracks at your chosen rate and bit depth, so you can see how quickly a multitrack setup fills a card. Commas work as decimal separators too.

How the calculation works

Uncompressed PCM audio stores one sample per track for every tick of the sample rate. Each sample takes bit depth ÷ 8 bytes, so the arithmetic is:

  • Bytes per second per track = sample rate (Hz) × bit depth ÷ 8
  • Bytes per second total = bytes per second per track × tracks
  • Bytes per hour = bytes per second total × 3,600
  • Session bytes = bytes per second total × minutes × 60
  • Usable capacity = card bytes × (1 − reserve % ÷ 100)
  • Hours that fit = usable capacity ÷ bytes per hour; whole sessions that fit = usable capacity ÷ session bytes, rounded down
  • Largest single file = session bytes (one file with all channels) or session bytes ÷ tracks (separate mono files)

Worked examples, all computed with the formula above (MB = 1,000,000 bytes):

Sample rate / bit depth / tracksBytes per secondMB per hour
44,100 Hz / 16-bit / 188,200317.52
48,000 Hz / 24-bit / 1144,000518.4
48,000 Hz / 32-bit / 1192,000691.2
96,000 Hz / 24-bit / 1288,0001,036.8
48,000 Hz / 24-bit / 81,152,0004,147.2 (about 4.15 GB)
Uncompressed PCM estimates, computed from the formula.

Decimal vs binary units. Card and drive makers use decimal units: 1 MB = 1,000,000 bytes and 1 GB = 1,000,000,000 bytes. Many operating systems report binary units: 1 MiB = 1,048,576 bytes and 1 GiB = 1,073,741,824 bytes. The calculator shows both, so you can compare its figures with the label on your card and with what your computer reports.

Why real files differ from the estimate

Every result is an uncompressed PCM estimate. Real files and real cards differ for several reasons:

  • File headers and metadata add a small amount to each file.
  • Compressed formats such as MP3 or FLAC change file size; this tool does not model them.
  • Sample-rate conversion in the recorder or DAW changes the rate actually written to disk.
  • Recorder-specific file splitting or formats vary from device to device; check your manual.
  • Card formatting and filesystem overhead take some space before you record anything.

There is also a hard limit per file: a single standard WAV file can’t exceed 4 GiB (≈ 4.29 GB), because its header stores the size as a 32-bit number. Recorders and DAWs then split files or switch to RF64, BW64 or W64. At 44.1 kHz, 16-bit stereo in one file, that limit is reached after about 6.8 hours (4,294,967,296 bytes ÷ 176,400 bytes per second).

Because the limit applies to each file, the calculator’s warning depends on the file layout you pick. With “One file with all channels,” it warns when the whole session’s estimated audio data reaches roughly 4 GiB. With “Separate mono file per channel,” it checks each channel file instead (session size ÷ tracks), so the same multitrack session may stay well under the limit. Track count alone doesn’t tell you which layout your device uses, so check its manual.

How much storage does a multitrack recording need?

Storage grows in direct proportion to track count. Doubling the tracks doubles the bytes per second, so a card that holds a given number of hours for one track holds half that for two and one eighth for eight. This holds whether a mixer-recorder or multi-input interface writes every channel as its own file or all channels into one file; the total is the same, which is why the live table under the result lists 1 to 32 tracks side by side. Only the size of each individual file changes with the layout.

Sample rate and bit depth scale the size the same way. Moving from 48 kHz to 96 kHz doubles the data, and moving from 24-bit to 32-bit adds one third (4 bytes per sample instead of 3). These are statements about file size only, not about how a recording sounds.

When you choose a recorder, interface and card, count the tracks you will really arm, pick the rate and bit depth you plan to use, then enter the length of your longest session. If the result says “Does not fit,” the shortfall tells you how much more space you need. Do a short test recording on your own device to confirm the numbers before an important session.

Methodology & sources

Every number this calculator shows is computed from the formula above; no external dataset, product data or prices are used. Constants and caveats come from these sources:

  • Focusrite: Sample Rate, Bit Depth & Buffer Size Explained: the sample rates and bit depths offered.
  • NIST: Prefixes for binary multiples: decimal (MB, GB) versus binary (MiB, GiB) units.
  • Wikipedia: WAV: the 4 GiB limit of standard WAV files and the W64/RF64 extensions.
  • EBU Tech 3306 (RF64): cross-check of the 4 GB limit and the switch to RF64, now ITU-R BS.2088 (BW64).

The five worked examples are re-verified, and the source links re-checked, every 12 months or as soon as a cited source changes.

This calculator gives planning estimates only. Actual recording capacity depends on your device and settings, so always do a test recording and keep backups of important sessions before relying on any estimate.

Last updated: October 2026

FAQ

Does a stereo track count as one or two?

Two. The calculator counts mono channels, so a stereo pair is entered as 2 tracks and takes twice the space of a single mono track.

Why does my card show less space than printed on it?

Cards and drives are marketed in decimal units (1 GB = 1,000,000,000 bytes), while many operating systems report binary units (1 GiB = 1,073,741,824 bytes). A 64 GB card therefore shows as about 59.60 GiB, and formatting and the filesystem take some space too.

How much space does one hour of 48 kHz, 24-bit audio take?

One mono track takes 144,000 bytes per second, which is 518.4 MB per hour uncompressed. Eight tracks at the same settings take 4,147.2 MB, about 4.15 GB, per hour.

Does 32-bit float use more space than 24-bit?

Yes. A 32-bit sample uses 4 bytes and a 24-bit sample uses 3 bytes, so 32-bit files are one third larger at the same sample rate and track count.

Is there a maximum size for a single WAV file?

A single standard WAV file can’t exceed 4 GiB (≈ 4.29 GB) because its size field is a 32-bit number; recorders and DAWs then split files or switch to RF64, BW64 or W64. The limit applies per file, so if each channel is stored as its own file, it applies to each channel file, not to the session total.

Related guides

  • How to Choose an Audio Interface: Inputs, Preamps, Latency and Connectivity
  • How Many Inputs Do I Need on an Audio Interface? Vocals, Bands and Drums
  • Audio Interface vs USB Mic: Which Setup Sounds Better for the Money?
  • 12 Best Audio Interfaces for iPad
  • How to Reduce Latency on an Audio Interface: Buffer Size, Drivers and Monitoring
  • Audio Cable Types Chart: XLR, TRS, TS, RCA and MIDI at a Glance

More free tools

Audio Interface Buffer Size & Latency Calculator

Convert audio interface buffer size and sample rate to milliseconds, estimate round-trip delay with your own overhead, and view a latency chart.

Headphone Drive Check: Will My Interface Power These?

Estimate whether an audio interface can drive your headphones: power in mW, maximum SPL and margin to your own target, with every step shown.

Home Studio Room Calculator: Acoustic Treatment & Monitor Placement

Enter room size and finishes to get room modes, RT60 per octave, a panel count, monitor triangle, SBIR null and first-reflection points.

See all free tools (4) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 RecordPure | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Studio Microphones
  • Audio Interfaces
  • MIDI Controllers
  • Acoustic Treatment
  • Free Tools
Search