Skip to content
RecordPure logo — studio microphone icon with the RecordPure wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Studio Microphones
  • Audio Interfaces
  • MIDI Controllers
  • Acoustic Treatment
  • Free Tools
RecordPure logo — studio microphone icon with the RecordPure wordmark
Free calculator

Audio Interface Buffer Size & Latency Calculator

Convert audio interface buffer size and sample rate to milliseconds, estimate round-trip delay with your own overhead, and view a latency chart.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Buffer time is not the latency you hear, and no interface, driver or converter overhead is assumed; only the overhead you enter is added. This tool is for timing estimates only and is not safety or medical advice; keep headphone and monitor levels moderate, because prolonged loud listening can damage hearing.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

Audio interface buffer size (also called block size) is the number of samples your computer processes per chunk, and it sets part of your latency: one-way buffer time in ms = buffer ÷ sample rate × 1000. Pick your rate and buffer below for buffer time, a round-trip estimate with your own overhead, and a full latency chart.

How to use the audio interface buffer size calculator

  1. Choose your sample rate. Pick 44.1, 48, 96 or 192 kHz to match the project or interface setting in your DAW.
  2. Choose your buffer size. Select one of the common values from 32 to 2048 samples, or pick “Custom…” and type any whole number in that range. Non-power-of-two values are fine; the formula still holds.
  3. Add your own overhead (optional). If your DAW’s audio preferences or your interface driver’s control panel reports a round-trip latency, enter the extra beyond the two buffers as overhead in milliseconds. Leave it empty if you don’t know it; the tool never fills in a value for you.
  4. Set a ceiling (optional). Enter your own round-trip limit in milliseconds. Chart cells whose estimated round trip is at or below it are marked with a ✓ and the words “within your ceiling”.
  5. Switch the chart view and print. Toggle between one-way buffer time and estimated round trip, then use “Print chart” for a clean copy with a caption showing the view, the overhead used and the date.

Results update as you type. Your current setting is marked ◀ in the chart, and the result box repeats the formula with your own numbers substituted so you can check the arithmetic.

The formula: buffer size to milliseconds

A buffer holds a fixed number of samples, and the sample rate tells you how many samples pass each second. Dividing one by the other gives the time one buffer covers:

  • Buffer time (one way), ms = buffer size (samples) ÷ sample rate (Hz) × 1000
  • Estimated round-trip delay, ms = 2 × buffer time + your overhead

Worked example 1: 128 samples at 48 kHz → 128 ÷ 48,000 × 1000 = 2.6667 ms one way, so 5.3333 ms round trip with no overhead entered. Worked example 2: 1024 samples at 44.1 kHz → 1024 ÷ 44,100 × 1000 = 23.2200 ms one way, or 46.4399 ms round trip before overhead.

Buffer (samples)Sample rateOne-way buffer time (ms)Round trip, overhead 0 (ms)
6444.1 kHz1.45122.9025
12848 kHz2.66675.3333
102444.1 kHz23.220046.4399
25696 kHz2.66675.3333
2048192 kHz10.666721.3333
32192 kHz0.16670.3333
Worked examples computed with buffer ÷ sample rate × 1000, rounded to 4 decimals.

Buffer time vs real round-trip latency

The one-way buffer time is not what you hear. When you monitor through your computer, sound is converted from analog to digital, buffered on the way in, processed, buffered on the way out and converted back to analog. Buffering is only one of those stages, so the real round trip also depends on your driver, your converters and any safety offset your system adds. Those delays vary by setup, and we have no reliable figure for any particular interface, so the calculator asks you to enter your own overhead instead of guessing one. For more on the practical side, see how latency affects recording.

Audio interface latency chart (block size to milliseconds)

This audio interface latency chart lists the one-way buffer time for every common buffer (block size) and sample rate. It is plain arithmetic from the formula above, so it reads the same whichever DAW or interface you use. The interactive version in the calculator adds a round-trip view with your overhead and your own ceiling markers.

Buffer (samples)44.1 kHz48 kHz96 kHz192 kHz
320.730.670.330.17
641.451.330.670.33
1282.902.671.330.67
2565.805.332.671.33
51211.6110.675.332.67
102423.2221.3310.675.33
204846.4442.6721.3310.67
One-way buffer time in milliseconds = buffer ÷ sample rate × 1000, rounded to 2 decimals. Double it and add your own overhead for a round-trip estimate.

Two patterns fall straight out of the formula. Doubling the buffer doubles the time: 128 samples at 48 kHz is 2.67 ms, 256 samples is 5.33 ms. Doubling the sample rate halves it: 256 samples is 5.33 ms at 48 kHz but 2.67 ms at 96 kHz. The same arithmetic works for any other rate your interface offers, such as 88.2 or 176.4 kHz.

Which buffer for tracking, which for mixing

Buffer size is a trade-off. A smaller buffer means less delay but puts more load on your computer, which can cause clicks, glitches or dropouts; a larger buffer is easier on the computer but adds delay. Focusrite’s support guide on buffer size describes the same trade-off and does not recommend one specific setting, because it depends on your project.

  • Tracking (recording and monitoring yourself): use the smallest buffer your computer handles without clicks or dropouts.
  • Mixing: a larger buffer gives your computer more headroom for plugins, and the extra delay matters less because you are not playing live.

No buffer size is guaranteed to work on a given computer: processor, plugin count and driver all play a part. That is why the calculator has no built-in “good” or “bad” bands; if you have your own limit, enter it as a ceiling.

Methodology & sources

Every number on this page is either computed from the formula or entered by you. One-way buffer time is buffer ÷ sample rate × 1000, kept at full precision internally and shown to 2 decimals. The round-trip estimate is a simplified model: one input buffer plus one output buffer of the same size, plus a single overhead value that you supply. Any driver delay, converter delay, safety offset or extra buffering belongs in that overhead figure.

What the tool does not know: your interface, driver, converters, computer or plugin load. It does not state any interface-specific latency, does not suggest an acceptable latency, and cannot tell you whether a buffer setting will run cleanly on your system. No product data, prices or specs are used.

  • Focusrite Support: Sample Rate, Bit Depth, and Buffer Size Explained — standard sample-rate set and qualitative guidance on lower buffers for recording and higher buffers for mixing.
  • Wikipedia: Latency (audio) — cross-check that smaller buffers reduce latency and that conversion and processing also add delay.

This tool is for timing estimates only and is not safety or medical advice; keep headphone and monitor levels moderate, because prolonged loud listening can damage hearing.

Last updated: October 2026

FAQ

What is audio interface buffer size (block size)?

Buffer size, called block size in some DAWs, is the number of audio samples your computer handles in each chunk. Each chunk lasts buffer ÷ sample rate seconds, so a larger buffer adds delay while a smaller one puts more load on your computer.

Does a higher sample rate lower latency?

For the same buffer size, yes: buffer ÷ sample rate × 1000 gives fewer milliseconds at a higher rate. For example, 256 samples is 5.33 ms at 48 kHz but 2.67 ms at 96 kHz.

Why is my DAW’s latency number different?

This calculator’s buffer time covers buffering only. Real round-trip latency also includes driver, converter and any safety-offset delay, so enter that extra as overhead if your DAW or driver panel reports it.

What buffer size should I use for recording and mixing?

For tracking, use the smallest buffer your computer handles without clicks or dropouts. For mixing, a larger buffer gives your computer more headroom for plugins, and the extra delay matters less because you are not playing live.

Is the one-way buffer time the latency I hear?

No. Monitoring through your computer passes audio through input and output buffers plus driver and converter stages, so the tool also shows a round-trip estimate: 2 × buffer time + your own overhead.

Related guides

  • How to Reduce Latency on an Audio Interface: Buffer Size, Drivers and Monitoring
  • How to Choose an Audio Interface: Inputs, Preamps, Latency and Connectivity
  • How Many Inputs Do I Need on an Audio Interface? Vocals, Bands and Drums
  • Audio Interface vs USB Mic: Which Setup Sounds Better for the Money?
  • Types of Audio Connectors: A Visual Guide for Home Studios
  • How to Acoustically Treat a Room for Recording on a Home-Studio Budget

More free tools

Headphone Drive Check: Will My Interface Power These?

Estimate whether an audio interface can drive your headphones: power in mW, maximum SPL and margin to your own target, with every step shown.

Home Studio Room Calculator: Acoustic Treatment & Monitor Placement

Enter room size and finishes to get room modes, RT60 per octave, a panel count, monitor triangle, SBIR null and first-reflection points.

Recording Software Finder: Free & Paid DAWs and Recording Apps

Filter 23 verified recording apps and DAWs by price, license, platform, use case and feature, plus free DAWs bundled with interfaces.

See all free tools (4) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 RecordPure | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Studio Microphones
  • Audio Interfaces
  • MIDI Controllers
  • Acoustic Treatment
  • Free Tools
Search